Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Wear Light on a BMW X5?

Model: BMW X5 F15 - Years 2013-2018
Part: Warning light – error code

To reset the brake wear light on a BMW X5, turn on the ignition so you can navigate the menu using the button on the left side of the instrument cluster. Press this button for a few seconds until a message appears indicating that you can reset the brake pad wear light. Then, press and hold the same button for a few seconds until the light reset occurs. You can also verify that the reset was successful from the onboard computer display in the center of the dashboard.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset Warning Lights on BMW X5
How to Reset Warning Lights on BMW X5
BMW X5 (2013-2018 / F15) As usual, before performing any maintenance on a vehicle, position your BMW X5 securely and safely to work on it in stable conditions (in this case, …
How to reset the tire pressure sensor of the BMW X5
How to reset the tire pressure sensor of the BMW X5
BMW X5 (2013-2018 / F15) Let's discover the steps necessary to reset the tire pressure monitoring system (TPMS) light on the BMW X5; before performing the reset, it is necess…
How do you reset the Service light on the BMW X5?
How do you reset the Service light on the BMW X5?
BMW X5 (2007-2013 / E70) The procedure to reset the Service light on the BMW X5 is done by turning on the instrument panel, inserting the ignition key into the corresponding …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos