Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the fuel pump in the BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Fuel pump
Operation: How to replace the fuel pump in the BMW 3 Series

In today's video we see how to replace the fuel pump and its pressure regulator in the BMW 3 Series. First we must proceed by purchasing the specific spare parts on the dedicated sites. Secondly, we can act on the rear bench, as the unit will need to be disassembled. Once this is done we can act on the pump, immersed in the tank. Once removed carefully we can replace it with a new component. We then act on the regulator and operate according to specific needs. Once this is done we reassemble everything and we can then finish the work to be done.


Posted on 8 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the BMW 320d diesel pump not working? Read Answer
    • Serie 3 1998-2006 - How to solve the problem with the fuel pump in the BMW 3 Series? Read Answer
    • Serie 3 1998-2006 - Where is the fuel pump of a BMW 3 Series located? Read Answer
    • Serie 3 1998-2006 - Where is the diesel pump of the BMW 3 Series E46? Read Answer
    • Serie 3 1998-2006 - Where is the diesel pump of the BMW 320d E46? Read Answer
    • Serie 3 2005-2013 - Where is the fuel pump of the BMW 320 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos