Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Time on a BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Clock

This brief video tutorial explains how to change the time on a BMW 1 Series, model produced from 2004 to 2013. First, turn on the vehicle's instrument panel. Then, push the lever on the left of the steering wheel upwards to open the menu on the information display. Continue to hold the lever until you reach the clock icon and press the end button to access it. Here, you can change the hours and minutes by moving the lever up and down, and finally confirm the new time by pressing the end button again.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on a BMW 1 Series
How to Change the Time on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this brief video tutorial, you will see how to change the time on a first-generation BMW 1 Series produced from 2004 to 2013. To change the time, …
How to Change the Front Headlight Bulb on a BMW 1 Series
How to Change the Front Headlight Bulb on a BMW 1 Series
BMW Serie 1 (2019-2026 / MK 3, F40) To change the front headlight bulb on a BMW 1 Series, switch off the vehicle and the lights, then open the bonnet. Locate the rear of the affected he…
How to Change Engine Oil and Filter on a BMW 1 Series
How to Change Engine Oil and Filter on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To change the engine oil and filter on a BMW 1 Series, open the car door and pull up the engine compartment release lever located at the bottom left …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos