Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Seat Adjustment Control Cover

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Seat

If you need to remove the side trim cover of the driver's seat, where the controls for the electric seat adjustment are located, first remove the seat from the cabin to make the operation easier. Once the seat is removed, locate the plastic tabs that secure the side cover to the seat. Disconnect the tabs, then remove the rear mounting screw and pull the cover away from its position to disconnect the power supply. Finally, you can detach the control panel from the cover.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1998-2006 / E46) To replace the external rearview mirror, first remove the door panel to disconnect the connector for the mirror adjustment controls; start by unscrew…
BMW Serie 3 (1998-2006 / E46) To remove the outside rearview mirror, first remove the door trim panel (see reference guide). Once the panel is removed, pull out the clips along th…
BMW Serie 3 (1998-2006 / E46) To remove the windshield pillar trim, first remove the molding located at the center and below, where the mounting screws are found. This molding is …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos