Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to reset the BMW 3 Series F30 service light

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: -board computer
Operation: How to reset the BMW 3 Series F30 service light

The service light is a reminder to remind you of the need to service your car, in this case a BMW 3 Series f30. Fortunately, it is possible to reset it manually and without using an external diagnostic tool. Let's find out how it's done. First, insert the key and turn on the ignition. Navigate the on-board menu until you find the "Vehicle Information" option. Select it and immediately enter "Vehicle status". At this point, enter "Service requirements", select the "Engine oil" item and continue with the restore. Finally, exit the menu and you are done.


Posted on 9 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 1998-2006 - What to do if the on-board computer on your BMW 3-series E46 no longer works? Read Answer
    • Serie 3 2019-2026 - How to reset the brake light on BMW 3 series? Read Answer
    • Serie 3 2005-2013 - Why does the BMW 3 Series navigator stop working? Read Answer
    • Serie 3 2012-2019 - What does the message "water in the tank" mean in my BMW 3 Series? Read Answer
    • Serie 3 2012-2019 - What to do if the brake pad reset does not work in a BMW? Read Answer
    • Serie 3 2012-2019 - What warning lights are there in the dashboard of the BMW 3 Series? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos