Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location and Diagram of Fuses for the BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Fuse box

In this guide, discover the location and diagram of the fuses for the BMW X3 by following the instructions below. First, get inside the vehicle and locate the internal fuse box; then, open the glove compartment and remove the screws on the sides to take it out, finding the fuse box on the back, as shown in the video. Next, open the hood to access the external fuse box; remove the small plastic grille and take off the cover to access the fuses. You will find the fuse diagram on the covers or in the owner's manual!

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse box and fuse positioning of the BMW X3
Fuse box and fuse positioning of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Today we will see the steps that will allow us to identify the fuse boxes and their diagram of the BMW X3, following the instructions below. First of…
Fuse Diagram and Placement for the BMW X3
Fuse Diagram and Placement for the BMW X3
BMW X3 (2010-2017 / MK 2, F25) In this brief guide, we will look at the fuse diagram and placement for the BMW X3. First, open the trunk lid and start removing the trim on the righ…
Diagram and positioning of the external fuses of the BMW X3
BMW X3 (2010-2017 / MK 2, F25) In today's video, we will see the instructions that will allow us to discover the layout and positioning of the internal fuse box of the BMW X3. Firs…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos