|
Do it yourself
| |||
| ||||
How to Adjust the Handbrake on a BMW 3 Series 320d
Model: BMW Serie 3
E92, E90, E91
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
This guide will show the procedure for adjusting or repairing the handbrake on the BMW 3 Series 320d. To carry out this procedure, follow these steps: 1. Lift the car with a jack or preferably with proper lifts; 2. Remove the bolts from the rear wheels and then the rear wheels using a 17mm wrench; 3. Remove the brake shoes and calipers; 4. Remove the brake discs gently using a hammer; 5. Once the rear brake discs are completely removed, check that the adjuster controlling the opening and closing of the shoes is stuck or has anomalies and repair or replace it if necessary; 6. Clean the surface of the brake track and reassemble everything in reverse order of the steps; 7. Finally, apply the brake a few times to adjust the caliper and check the operation of the handbrake.
Updated on 17 July 2026 by ScegliAuto
Related tutorials
BMW Serie 3
(2005-2013 /
E92, E90, E91)
To adjust the parking brake on your vehicle, locate the cable's stop mechanism. To access it, remove the rear wheels where the parking brake is used.…
BMW Serie 3
(1998-2006 /
E46)
In this video, see how to adjust the parking brake on a BMW 3 Series. Use a screwdriver to remove the cover from the parking brake lever next to the …
BMW Serie 3
(2005-2013 /
E92, E90, E91)
To adjust the handbrake on a BMW 3 Series, lift the leather cover that surrounds the handbrake lever to access the components underneath. Here, you w…
Other guides you may be interested in |
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
