Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Door Handle on the BMW 3 Series

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Handle

To replace the exterior door handle on the BMW 3 Series, first remove the door panel to access the components underneath: the screws securing the panel are located at the handle and under the armrest. Once the panel is removed, you can unscrew the bolts on the side of the door, allowing the internal mechanism of the handle to be released: this will enable you to detach the handle from the exterior of the door and replace it with a new one. After the replacement, reassemble all the components that were previously removed.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Outer Handle on a BMW 3 Series?
How to Replace the Outer Handle on a BMW 3 Series?
BMW Serie 3 (2019-2026 / G20) To replace the outer handle on a BMW 3 Series, open the door and remove the circular cover located on the side of the door. Once the cover is removed…
How to Remove the Handle of the BMW 3
How to Remove the Handle of the BMW 3
BMW Serie 3 (1998-2006 / E46) Remove the outer door handle of the BMW? Let's take off the handle from the 3 Series. Move the plastic cover at the top of the door, then unscrew the…
How to Remove the Exterior Door Handle of a BMW 3 Series
How to Remove the Exterior Door Handle of a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Before you begin, open the front door of your BMW 3 Series. Start by prying off and removing the side cover that protects the screw securing the exte…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos