Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Front Subwoofer

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Speaker

The subwoofer is a speaker dedicated to reproducing low-frequency sounds and is used to enhance the extension of low frequencies, along with speakers that cover higher frequency ranges. In the car model in question, it is located right under the driver's seat, and to remove it, you must also remove the seat; start by disconnecting the seatbelt, then slide the seat all the way forward to access the rear mounting pins, and then slide it backward to remove the front ones; once the seat is removed, take off the protective grille of the subwoofer and then the subwoofer itself by disconnecting the corresponding plug.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to mount the subwoofer in the BMW 328i E90
How to mount the subwoofer in the BMW 328i E90
BMW Serie 3 (2005-2013 / E92, E90, E91) The guide shows how to mount the subwoofer on the BMW 328i E90. To do this, you need to connect an audio amplifier and a signal converter. From the l…
Instructions for Disassembling the Ashtray Compartment
Instructions for Disassembling the Ashtray Compartment
BMW Serie 3 (1998-2006 / E46) If the ashtray compartment lid does not close anymore, you need to disassemble it. Start by pulling the knob of the gear shift lever, then remove the…
Instructions for Removing the Exhaust System
Instructions for Removing the Exhaust System
BMW Serie 3 (1998-2006 / E46) If you need to remove the exhaust system, it is advisable to let the system cool completely and position the vehicle on car ramps if you do not have …

Other guides you may be interested in

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos