Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear tail light bulb of the BMW 5 Series F10?

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Tail light bulb

If you want to find out how to correctly replace the rear headlight bulb of your BMW 5 Series F10, all you have to do is carefully read the following guide and follow all the steps described. First, park the car on a flat surface and turn it off completely. Immediately after, go to the rear area and lift the trunk. At this point, remove the various rubber caps along the upper edge and unscrew the screws. Once this is done, remove the protective fabric layer and slide out the bulb holder. Finally, all that's left is to replace the faulty bulb with the new one.

Posted on 30 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light of the BMW 5 Series
How to replace the rear light of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) The following video tutorial will show you the steps to replace the rear headlight of the BMW 5 Series model F10 produced from 2010 to 2017. The firs…
BMW 5 Series Headlight Bulb Replacement
BMW 5 Series Headlight Bulb Replacement
BMW Serie 5 (2010-2017 / F11, F10) Today we see in this guide the instructions on how to remove and replace the low beam headlight bulb of the BMW 5 Series. First we open the engine ho…
How to disassemble the front headlight of the BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) If you want to disassemble one of the front headlights of your BMW 5 Series F10 by yourself, you just need to follow the steps described in our new g…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos