Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Brake Wear Light on the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

In this brief and simple guide, follow the instructions to reset the brake pad wear light on the BMW 5 Series. First, ensure you have replaced the worn brake pads.

Then, get in the vehicle and turn on the ignition, scrolling through the buttons until you reach the brake wear indicator on the instrument cluster display, as shown in the video. At this point, press and hold the button on the cluster until the reset procedure is complete (displayed at the bottom of the cluster display)!


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Reset the Brake Wear Indicator on a BMW 5 Series
How to Reset the Brake Wear Indicator on a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) To reset the brake wear indicator on a BMW 5 Series, turn on the ignition so you can navigate through the menu by pressing the CHECK button located o…
How to Reset the Tire Pressure Light on a BMW 5 Series
How to Reset the Tire Pressure Light on a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) This simple and brief information will show you the process to reset the tire pressure monitoring system (TPMS) light on a BMW 5 Series; before perfo…
Reset Tire Pressure Monitor on a BMW 5 Series
Reset Tire Pressure Monitor on a BMW 5 Series
BMW Serie 5 (2017-2024 / G30) In this quick tutorial, you will see the entire procedure to reset the tire pressure warning light on a BMW 5 Series, G30 model, produced from 2017 o…

    Frequently Asked Questions

    • Serie 5 2017-2024 - What does the orange engine warning light mean in the BMW 5 Series G30? Read answer

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos