Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Fuel Filter

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Fuel filter

See other generations:
Video tutorial

The fuel filter is a component that needs to be replaced regularly. To proceed with this operation, wear safety glasses and rubber gloves.

The necessary tools are: new replacement filter, hose clamps, screwdriver, ratchet wrench, and wire cutters. The first step is to remove the fuse related to the fuel pump to cut power during the replacement work.

Raise the vehicle and secure it, then remove the protective cover of the filter by taking off the relevant bolts. Place a plastic sheet in the work area to catch any gasoline that may spill.

The filter is secured with a front and a rear bracket that need to be removed to allow the hose clamps to be taken off that hold it to the fuel line. Once the clamps are removed, take out the filter, allowing the gasoline inside to drain into a container.

Install the new filter, paying attention to the flow direction indicated by an arrow on the filter itself. Reinstall a new protective cover.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Filter on a BMW 3 Series
How to Remove the Fuel Filter on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's see how to remove and replace the gasoline filter on a BMW 3 Series. Lift the car on a column lift (jack) and locate the gasoline filter (as sh…
How to Replace the Fuel Filter on a BMW 3 Series
How to Replace the Fuel Filter on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you can see how to replace the fuel filter on a BMW 3 Series. The first step is to purchase a new fuel filter from an authori…
How to Replace the Air Filter on a BMW 3 Series
How to Replace the Air Filter on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) The following steps will show you the procedure for removing and replacing the engine air filter on a BMW 3 Series, 328i gasoline version. First, ope…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos