Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rain sensor in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Checks and maintenance

In this tutorial, we can see how to replace the rain sensor in the BMW 3 Series, a very simple and quick operation. To do this, we will need a preferably plastic spatula so as not to leave any marks. First of all, we completely lower the interior rearview mirror, then we unhook the cover of the base by levering along the central joint. Once completely removed, we can detach the mirror, disconnect the sensor connector, and unlock the fixing clips. To install the replacement, it will be sufficient to follow the reverse procedure.

Posted on 28 July 2023 by ScegliAuto

Video tutorial

Related tutorials

Rain Sensor Activation Instructions
Rain Sensor Activation Instructions
BMW Serie 3 (2005-2013 / E92, E90, E91) Next to the windshield wiper control lever, there is a button to activate the rain sensor: pressing the button turns on a green LED that indicates th…
How to find out the fuse diagram of a BMW Series 3
How to find out the fuse diagram of a BMW Series 3
BMW Serie 3 (1998-2006 / E46) The selected video shows the diagrams related to the fuse boxes present in a BMW Series 3 car. The fuse panels are located inside the vehicle's cabin…
How to Remove and Replace the Air Temperature Sensor on a BMW 3 Series
How to Remove and Replace the Air Temperature Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Here’s how to remove and replace the air temperature sensor on a BMW 3 Series: Open the hood, lift it, and secure it with the prop rod. Disconnect th…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos