Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 3
  6. : How to replace the external handle on the BMW M3?

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 G20 - Years 2019-2024
Part: Handle
Operation: How to replace the external handle on the BMW M3?

In this tutorial, we can see how to replace the external handle in the BMW M3, an extremely simple and fast operation. First of all, we open the door in which we will be working, then we locate the small plastic cap on the inner edge of the door, at the height of the handle, and remove it. Next, we loosen the screw accessible through the hole using a long Torx T15 screwdriver, grip the handle and detach it from the door. At this point, we can disconnect the connector, connect the replacement, and install it by following the exact reverse procedure.


Posted on 7 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos