Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the lock module for the BMW 3 Series.

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Door lock

Below we will discover the steps that will allow us to disassemble and replace the front door lock module of the BMW 3 Series. First, we open the front door and start removing the door panel by unscrewing all the fixing screws. Then, we disconnect the electrical connector and the handle cable that we find on the back, as shown in the video. At this point, we unscrew the screws of the door lock module, removing it and replacing it with the new one. We properly install everything and finally reassemble the door panel!

Posted on 9 August 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

How to disassemble the front door lock cylinder of the BMW 3 Series E36.
How to disassemble the front door lock cylinder of the BMW 3 Series E36.
BMW Serie 3 (1990-2001 / E36) Let's see in this video how to disassemble and replace the lock cylinder of the front door of the BMW 3 Series E36, following the instructions below.…
Removal of central locking unit BMW Serie 3 E90
Removal of central locking unit BMW Serie 3 E90
BMW Serie 3 (2005-2013 / E91, E90, E92) Let's see how to disassemble the central locking of a BMW 3 Series E90, following these simple instructions. First we open the front door and we go t…
How to replace the ignition cylinder of the BMW 3 Series
How to replace the ignition cylinder of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's main steps will show us how to disassemble and replace the ignition cylinder of the BMW 3 Series. First, we get on board the car, on the driv…

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos