Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Front Bumper

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Front bumper

See other generations:
Video tutorial

Removing the front bumper does not require special recommendations, but it is important to locate all the mounting points to remove it correctly; open the hood and locate the four screws directly above the front grille. Then, detach the covers of the headlight washer devices, unscrew the mounting screws of the front wheel wells to then unscrew those that attach the edge of the bumper to the fender (on both sides); proceed to remove the screws applied to the lower edges, those on the grille, and finally remove the bumper by detaching the light holders of the fog lights.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Removing the Front Bumper of the BMW 3 Series
Removing the Front Bumper of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, discover the steps to remove and replace the front bumper of the BMW 3 Series by following the instructions below. First, open the hood of you…
Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
BMW Serie 3 (1990-2001 / E36) To comfortably remove the front bumper, position the vehicle on appropriate automotive jack stands and remove the front wheels, the plastic wheel wel…
How to Remove Front Headlight on BMW 3 Series E90
How to Remove Front Headlight on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) Removing the front headlight first requires removing the front bumper: start by removing the mounting pins along the lower edge, then remove the ones…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos