Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Damaged Handle on a BMW 3 Series E92

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Handle

Let's see how to replace the damaged handle on a BMW 3 Series E92: First, obtain the replacement handle, which you can find on eBay with the code 402241753932 for $34.90 each (including shipping). To remove it, first take off the wood trim from the door using a plastic trim tool. Use the same tool to pry the handle apart. Once the top part is removed, unscrew the screws that secure the bottom part to the body. Again, use the same tool to help remove the entire door cover from the body. Disconnect all electrical connectors. If necessary, take a photo to ensure you reconnect them correctly. Now, from the back, remove the plastic screws that hold the rear part of the handle. Proceed to install the new handle by inserting the screws that are part of the kit. Now that the base is reassembled, replace the door panel. Snap the top part back into place, and the job is done.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Inner Door Handle on a BMW 3 Series
How to Remove the Inner Door Handle on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, open the door of your BMW 3 Series. Start by removing and detaching the door panel, prying out and removing the inserts, then unscr…
Replacing the Handle on BMW 3 Series
Replacing the Handle on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, you will learn how to replace the door handle on the passenger side of the BMW 3 Series. First, position yourself on the passenger sid…
How to Remove the Door Handle Grip on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, learn how to remove and replace the inner door handle grip on a BMW 3 Series E90, a component exposed to normal wear from sunlight and frictio…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos