Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Clean the Air Vents on the BMW X5

Model: BMW X5 E70 - Years 2007-2013
Part: Air vents

Today’s guide will show you how to remove and clean the air vents on the BMW X5 by following these simple and quick steps. First, get inside the vehicle and start by removing the plastic cover located under the air vent. Then, unscrew the screws of the vents to remove them from the dashboard, as shown in the video. At this point, clean the blades with a brush or a soft cloth. Finally, reassemble and securely fasten the air vents, applying the same procedure to all air vents in the cabin.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Air Vents on the BMW X5
How to Remove the Rear Air Vents on the BMW X5
BMW X5 (2007-2013 / E70) In this guide, see how to remove and replace the rear air vents, as well as the front ones, on the BMW X5 by following the instructions below. First,…
Instructions for Removing the Navigation Display
Instructions for Removing the Navigation Display
BMW X5 (1999-2006 / E53) To remove the navigation display, first remove the central trim pieces of the dashboard. You should also remove the central air vents to access the u…
How to Remove the Center Dashboard Panel of the BMW X5?
How to Remove the Center Dashboard Panel of the BMW X5?
BMW X5 (2007-2013 / E70) To remove the center dashboard panel of the BMW X5, open the glove compartment located on the passenger side. This allows you to pull out the air ven…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos