Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bench Seat of the BMW X5

Model: BMW X5 E70 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Rear bench seat

See other generations:
Video tutorial

Today’s steps will show you how to remove the rear bench seat and then the backrests of the BMW X5. First, open the rear doors of the vehicle and start pulling the bench seat upward to detach it; then disconnect the seatbelt attachments as shown in the video.

At this point, you can remove the backrests by unscrewing all the screws found at the base of the seat; then remove the backrests from the cabin, protecting them or replacing them.

Apply the reverse procedure for reassembly!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

BMW X5 (2007-2013 / E70) In this guide, you will find the main instructions that will allow you to remove and replace the rear camera of the BMW X5. First, open the trunk hat…
BMW X5 (2013-2018 / F15) Today's video will show you the steps to remove and replace the rear bumper of the BMW X5, following the instructions below. First, open the trunk an…
BMW X5 (2007-2013 / E70) In this guide, see how to remove and replace the rear air vents, as well as the front ones, on the BMW X5 by following the instructions below. First,…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos