Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver's Airbag on a BMW X1

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Airbag

See other generations:
Video tutorial

Removing the airbag from any vehicle must be done safely, so first disconnect the battery to avoid any unpleasant incidents. Next, position the steering wheel at an angle, as shown in the video, and insert a star screwdriver into the slot at the bottom of it to remove the steering wheel cover.

Now, push on the left lever and remove the center part of the steering wheel, where the airbag is located. Disconnect the connector first.

Perform all necessary operations and reassemble everything.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a BMW X1
How to Remove the Front Bumper of a BMW X1
BMW X1 (2009-2015 / E84) Before you begin, open the hood of your BMW X1. Start by removing the screws that secure the bumper, located around the perimeter. Then, unclip and m…
Where to Find the OBD Port on the 2019 BMW X1 F48
Where to Find the OBD Port on the 2019 BMW X1 F48
BMW X1 (2015-2022 / F48) This guide will help you easily locate the OBD port on your BMW X1 F48. First, open the driver's side door and enter the cabin, ensuring the car is c…
How to Remove the Dashboard of the BMW X1
How to Remove the Dashboard of the BMW X1
BMW X1 (2009-2015 / E84) In this guide, you will find instructions to remove the entire dashboard of the BMW X1. First, get inside the cabin and start by removing the center …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos