Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the lock cylinder of the BMW 3 Series.

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Door lock

Below we will see the steps that will allow us to disassemble and replace the lock cylinder of the BMW 3 Series, following the instructions below. First, we open the front door and start removing the side plastic cap; then we unscrew the fixing screw that we find inside the hole, using a hex key, as shown in the video. At this point, we remove the lock cylinder from the outside, replacing the handle if necessary; we reassemble or repair the cylinder, following the video tutorial until the end!

Posted on 3 November 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the lock cylinder of the BMW 3 Series
How to replace the lock cylinder of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today we will discover the instructions that will allow us to disassemble and replace the lock cylinder of the BMW 3 Series. First of all, we open th…
How do you remove the locking cylinder from the BMW 3 Series?
How do you remove the locking cylinder from the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In order to remove the BMW 3 Series locking cylinder, the door must be opened and the silicone plug located near the internal door seal can be remove…
How to disassemble the front door lock cylinder of the BMW 3 Series E36.
How to disassemble the front door lock cylinder of the BMW 3 Series E36.
BMW Serie 3 (1990-2001 / E36) Let's see in this video how to disassemble and replace the lock cylinder of the front door of the BMW 3 Series E36, following the instructions below.…

Other guides you may be interested in

How to Remove the Steering Wheel on a Ford Fiesta

How to remove the steering wheel on a Ford Fiesta with the airbag? In this video, see how to proceed. Before removing the steering wheel, disconnect the battery power connectors. Unscrew the screws/clips located at the back of the steering wheel cover with a screwdriver, then remove the airbag from the steering wheel. Once the airbag is removed, disconnect the power cables, remove the central steering wheel anchoring pin, and disconnect the power connectors. Finally, pull the steering wheel out of its housing. To reassemble everything, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos