Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure in a BMW 1 Series?

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part:

Follow the steps outlined in the video to reset the tyre pressure in a BMW 1 Series. Here’s how to do it: 1) Sit in the driver’s seat, insert the key, and start the engine at idle in neutral; 2) Press the "menu" button located just above the iDrive knob; 3) Rotate the iDrive knob until the display shows "Vehicle Information" and then press the button to confirm; 4) Do the same for "Vehicle Status"; 5) Rotate the iDrive knob again to select "INIT" and confirm; 6) Select "Reset Tyre Pressure" and complete the procedure; You have completed the process.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Light on a BMW 1 Series
Resetting the Tyre Pressure Light on a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) These brief and simple steps will allow you to reset the tyre pressure light on a BMW 1 Series; before recalibrating the TPMS sensors, ensure all fou…
How to Reset the Tyre Pressure Light on a BMW 1 Series
How to Reset the Tyre Pressure Light on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To correctly reset the tyre pressure light on your BMW 1 Series, the steps are very simple and quick. First, inflate the tyres to the correct pressur…
Resetting the Tyre Pressure Light on a BMW 1 Series
Resetting the Tyre Pressure Light on a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In today's video tutorial, we will see how to reset the tyre pressure light on a BMW 1 Series, second generation model produced from 2011 to 2019. St…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos