Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Pump

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

A pump is a machine that uses moving mechanical parts to lift or move material. Once you locate the position of the part, lift the car on the side of the pump.

Now proceed to remove the wheel to easily access the pump. Locate the drain plug, which is usually positioned at the bottom of the radiator.

Unscrew it to drain the cooling system. Remove the belt that allows the pump to "spin." Install the new pump, tightening the mounting bolts securely and reconnecting the coolant hoses, tightening them firmly.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Power Steering Pump Replacement
Power Steering Pump Replacement
BMW Serie 3 (1998-2006 / E46) If you often need to top off the power steering fluid reservoir, it means there is a leak in the hydraulic system (pump, hoses, steering gear). The p…
Instructions for Replacing the Water Pump
BMW Serie 3 (1990-2001 / E36) The water pump is located at the front of the engine: open the hood and ensure it is securely supported. Remove the plastic engine cover and the smal…
Replace the Fuel Pump on BMW 3
Replace the Fuel Pump on BMW 3
BMW Serie 3 (2005-2013 / E92, E90, E91) How do you remove the damaged fuel pump? Let's take it out from inside the fuel tank in simple steps. Remove the rear seat cushions and locate the ac…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos