Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Add Coolant to the BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Antifreeze coolant

See other generations:
Video tutorial

The instructions in this guide will show you how to add coolant to the BMW 3 Series in simple and quick steps. First, open the hood of the vehicle and start unscrewing the cap of the coolant reservoir (when the engine is cold); then add and top off with new antifreeze of the same type as the existing one and suitable for your radiator, as shown in the video.

At this point, fill it up to the maximum level mark on the reservoir, finally screwing the cap back on until it clicks!


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to top off the coolant in the BMW 3 Series?
How to top off the coolant in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) In this tutorial, you will see how to check and top off the coolant in the BMW 3 Series, a very simple and quick operation. First, ensure that the en…
How to Check and Top Off Antifreeze
How to Check and Top Off Antifreeze
BMW Serie 3 (1998-2006 / E46) This video guide shows how to check the antifreeze in the cooling system and how to top it off if necessary. The first rule is to perform this operat…
How to Replace the Coolant in a BMW 3 Series?
How to Replace the Coolant in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, you will see how to replace the coolant in a BMW 3 Series, a very simple and quick operation. First, wait for the engine to be comp…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos