Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Starter motor

See other generations:
Video tutorial

In this video, see how to replace the starter motor on a BMW 3 Series E90: first, disconnect the negative terminal of the battery, located on the right side of the trunk, under a carpet cover. Next, lift the front of the vehicle and remove the lower cover to expose the starter motor.

Disconnect the wiring and supports, and at this point, you can remove it from its location. Meanwhile, you will find the new component on eBay with part number 283544816319 for $146.99, with free shipping.

Always check the compatibility of the replacement part with your vehicle. Reinstall the support bolts and wiring, replace the cover, and lower the car. Reconnect the negative battery terminal and close the battery compartment.

Operation complete.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Remove the Starter Motor on BMW 3 Series
Remove the Starter Motor on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Is the starter motor on your BMW 3 Series damaged? Here’s how to remove it. Open the hood and secure it. Remove the plastic cover under the windshiel…
Removing the Starter Motor from the BMW 3 Series
Removing the Starter Motor from the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these steps to remove and replace the starter motor on your BMW 3 Series. First, open the hood of your car and disconnect the battery terminal…
How to Remove the Starter Motor on a BMW 3 Series
How to Remove the Starter Motor on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to remove the starter motor on a BMW 3 Series. First, disconnect the battery cables using a socket wrench. Remove the engine soundproof…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos