Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Starter motor

See other generations:
Video tutorial

Let's see how to remove the starter motor on a BMW 3 Series. First, disconnect the battery cables using a socket wrench.

Remove the engine soundproofing panel along with the attached wires using a socket wrench and needle-nose pliers. Disconnect the exhaust connector, then disconnect the starter motor power terminals with pliers or a screwdriver depending on the pressure of the tabs.

Use a socket wrench to remove the mounting bolts of the starter motor and take it out of the engine compartment. Finally, install the new starter motor with the power cables and the associated mounting screws.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor on the BMW 3 Series E46
How to Remove the Starter Motor on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will learn how to remove and replace the starter motor on the BMW 3 Series E46, following the instructions below. First, …
Remove the Starter Motor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) What to do if the starter motor is damaged? Let's see how to remove the starter motor from a BMW. Lift the hood, disconnect the battery cables. Remov…
Remove the Starter Motor on BMW 3 Series
Remove the Starter Motor on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Is the starter motor on your BMW 3 Series damaged? Here’s how to remove it. Open the hood and secure it. Remove the plastic cover under the windshiel…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos