Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Remove the starter motor on BMW 3

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Starter motor
Operation: Remove the starter motor on BMW 3

Is the BMW 3 Series moped damaged? Let's see how it disassembles. Let's open the front hood, let's put it in safety. We remove the plastic covering placed under the windshield (in order to free the engine). We disconnect the terminals of the starter motor power supply with pliers. We remove the soundproofing panel and the exhaust manifold. We unscrew the locking pins of the starter motor with a socket wrench and remove it from the engine compartment. We assemble the new ignition motor with the connection of the power supply cables and with the attached tightening screws. We mount all protective plastics.


Posted on 9 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2012-2019 - Why does the starter motor of the BMW 3 Series spin idle? Read Answer
    • Serie 3 1990-2001 - Where is the starter motor of the BMW 3 Series E46 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos