Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Starter motor

See other generations:
Video tutorial

Before proceeding with the removal of the starter motor, it is recommended to disconnect the battery; the starter is mounted on the transmission case using torx-type bolts: therefore, unscrew the mounting bolts of the starter from the bell housing, disconnect the power cables from the relay, and carefully extract the starter from its location, taking care not to damage the o-ring gasket.

During maintenance of the starter motor (brush replacement), protect the corresponding area on the transmission with a clean rag to prevent debris from entering.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Remove the Starter Motor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) What to do if the starter motor is damaged? Let's see how to remove the starter motor from a BMW. Lift the hood, disconnect the battery cables. Remov…
Remove the Starter Motor on BMW 3 Series
Remove the Starter Motor on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Is the starter motor on your BMW 3 Series damaged? Here’s how to remove it. Open the hood and secure it. Remove the plastic cover under the windshiel…
Replacing the Starter Motor on BMW 3 Series
Replacing the Starter Motor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's replace the starter motor on a BMW 3 Series. Raise the hood and secure it. Remove the starter motor covers, disconnect the battery terminals an…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos