Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Front horn replacement

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Accessory Kit
Operation: Front horn replacement

Lift the hood and remove the plastic clamps under both headlights, then you will have to remove the lower part of the bumper, starting by removing the bolts and screws that lock the bumper to the inner fender, if it is more convenient you can remove the wheels to work more freely, then proceed to remove the lower panel of the bumper, unlocking the bolts present, disconnect the various connectors of the components present. Now you can start observing the horn and remove the connector connected to it, disconnect it and continue with the removal of the bumper, you can find a guide on how to do it on our site. Once the bumper has been removed, you can observe the horn and you can remove it very comfortably, replace it with a new one and retrace the steps backwards to reassemble all the pieces.


Posted on 20 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where can I connect the reversing camera on the BMW 320? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos