Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram and Location for BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Fuse box

This guide will show you where to find the interior fuses of the BMW 3 Series in simple and quick steps. First, open the front passenger door and start opening the glove compartment; then lower the lever located at the top to access the interior fuses, as shown in the video. At this point, you will find the white label displaying the fuse codes and amperages, which is useful for identification; the fuse diagram is also included in the vehicle's owner's manual. There is another fuse box in the engine compartment!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse box and fuse positioning of the BMW 3 Series.
Fuse box and fuse positioning of the BMW 3 Series.
BMW Serie 3 (2005-2013 / E91, E90, E92) Today's instructions will show us the layout and positioning of the fuses in the BMW 3 Series, following these simple steps. First, we get into the c…
Fuse Box Layout and Location for BMW 3 Series
Fuse Box Layout and Location for BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Below are the instructions to access the internal fuse box of the BMW 3 Series, including the layout and diagram. First, get inside the vehicle and o…
Fuse Diagram and Placement for BMW 3 Series
Fuse Diagram and Placement for BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Today's guide shows the diagram and placement of the fuse boxes for the BMW 3 Series in simple steps. First, open the hood of the vehicle and start b…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos