Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair a Door That Won't Close on a BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Checks and maintenance

Let's briefly review the instructions for repairing the front door closure on a BMW 3 Series. First, ensure that the issue is indeed with the door closure; sometimes the door appears closed, which may indicate that the door closure sensor is malfunctioning. If the door does not close properly, check both the latch and the door hinges; make sure these components are functioning correctly, replacing them with new ones if necessary, and follow the video tutorial to the end!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Fuel Door Cover on BMW 3 Series E92
Removing Fuel Door Cover on BMW 3 Series E92
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to remove the fuel door cover on a BMW 3 Series E92 by following these simple instructions. First, open…
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, learn how to replace the adhesive cover of the interior handle on a BMW 3 Series yourself. To perform this simple task, get inside the vehicle…
How to open the fuel door and cap of the BMW 3 Series
How to open the fuel door and cap of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Below we will see the instructions that will allow us to open the fuel door and cap of the BMW 3 Series. First of all, make sure that all the locks a…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos