Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to lower the rear seats in the BMW 3 Series?

Model: BMW Serie 3 G20 - Years 2019-2026
Part: Seat

In this tutorial we can see how to lower the rear seats in the BMW 3 Series, an extremely simple and quick operation, to be carried out for example in case we need more space in the trunk. First of all, we open the rear hatch, then we locate the two levers on the upper edge of the compartment and operate them by pulling them towards us. We then open the doors, grab the backrests and lower them completely. To put everything back together, it will be enough to lift the backrests and press them firmly towards their supports, in order to hook them.

Posted on 8 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Lower the Rear Seats of the BMW 3 Series
How to Lower the Rear Seats of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide briefly outlines the steps to lower the rear seats of the BMW 3 Series, increasing the trunk space, following the instructions below. Firs…
How to Lower the Rear Seats of a BMW 3 Series
How to Lower the Rear Seats of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) On some BMW 3 Series models, the mechanism to lower the rear seats is not located at the top of the seatback, but in the trunk. Open the rear hatch a…
How do you remove the rear seats of the BMW 3 Series?
How do you remove the rear seats of the BMW 3 Series?
BMW Serie 3 (1990-2001 / E36) In order to remove the rear seats of the BMW 3 Series, you need to lower the cover located in the middle of the two backrests; once this has been low…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos