Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to replace the flow meter on the BMW X3

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Accessory Kit
Operation: How to replace the flow meter on the BMW X3

As a first operation, unhook and lift the hood, then go to identify the position of the sensor in question, it is located in the notch of the air inlet pipe in the under-cover of the engine, once you have identified the sensor as also indicated in the video you will have to remove the tie that blocks the air inlet tube. Now go and disconnect the pin at the head of the sensor, in this way you can extract the tube including the sensor, then replace the piece in question and now you just have to retrace the steps backwards for the reassembly of the various pieces.


Posted on 25 September 2023 by ScegliAuto

This video is currently unavailable


How do you replace the rear differential oil on a BMW X3?
BMW X3 (2003-2010 / MK 1, E83) In order to replace the oil in the rear differential of the BMW X3, you need to access the lower part of the car: the differential will obviously be
How to change transmission oil on BMW X3
BMW X3 (2003-2010 / MK 1, E83) The transmission oil must be changed at the km recommended by the house, let's see the replacement on BMW X3. We lift the car on a column bridge and
How to remove the glow plugs of the BMW X3 2.0D
BMW X3 (2003-2010 / MK 1, E83) Let's find out in this guide the main instructions that will allow us to disassemble and replace the engine glow plugs of the Bmw X3 2.0D. First of a

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos