Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a BMW X1?

Model: BMW X1 U11 - Years: 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel of a BMW X1, start by fully lowering the window. Locate and remove the hidden screws under the trim, such as those around the inner handle and behind the speaker cover.

Use a plastic trim tool to gently pry off the trim without damaging the surface. Once the screws are removed, gently pull the panel to disengage the retaining clips along the edge.

Lift the panel upward to detach it from the top edge of the door. Be careful of the electrical connectors for the window controls and locks, disconnecting them carefully to avoid damaging the wires.

Once the panel is removed, you will have access to the internal components of the door for any repairs or replacements. Remember to follow these steps carefully to avoid damage and consult the owner's manual for specific details about your BMW X1.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a BMW X1?
How to Remove the Door Panel of a BMW X1?
BMW X1 (2009-2015 / E84) To remove the door panel of the BMW X1, use a tool to pry off the trim pieces located at the top of the panel and along the door's armrest. Once thes…
Removing Right Door Panel BMW X1
Removing Right Door Panel BMW X1
BMW X1 (2015-2022 / F48) Today, you will see the main steps to remove the door panel of a second-generation BMW X1. First, open the door and use a screwdriver to remove all t…
Removing the Front Door Panel of the BMW X1
Removing the Front Door Panel of the BMW X1
BMW X1 (2015-2022 / F48) This guide will show you how to remove and possibly replace the front door panel of the BMW X1. First, open the front door of the vehicle and start b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos