Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install an AUX Kit on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Accessory kit

In this video, see how to install the AUX kit on a BMW 3 Series. Use plastic trim tools to detach the lower plastic cover of the armrest where the air vents are located. Disconnect the power connector with a screwdriver. Turn on the ignition and position the gear shift lever in the center position. Next, remove the cover of the gear shift knob and then the entire center panel. Remove all the connectors and the retaining pins from the tunnel and pull it out. Now, sand the plastic next to the cigarette lighter socket and attach the AUX piece with a suitable two-part adhesive. Reassemble everything in reverse order of disassembly.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install BMW 3 Series Accessory Kit
How to Install BMW 3 Series Accessory Kit
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, see how to remove and install the cigarette lighter kit in the center console of a BMW 3 Series. Position the gear shift knob vertical…
Installation of the rear camera of the BMW 3 Series
Installation of the rear camera of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to install the rear camera useful for parking maneuvers on the BMW 3 Series. First of all, we get on bo…
How to Clean the Injectors on BMW 3 Series
How to Clean the Injectors on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's see how to clean the injectors on BMW 3 Series with the appropriate cleaning kit. Lift the hood and secure it with the prop rod, then disconnec…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos