Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install BMW 3 Series Accessory Kit

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

In this video, see how to remove and install the cigarette lighter kit in the center console of a BMW 3 Series. Position the gear shift knob vertically and pull it off. Then, use a plastic trim tool to remove the leather boot from the gear shift lever.

Next, use the trim tool to pry at the edge of the center console. Once the cover is removed, disconnect all the power connectors.

Unplug the cigarette lighter and replace it with a new one. Reassemble the center console cover and the gear shift knob with the boot.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Temperature Sensor on BMW 3 Series
How to Remove and Replace the Temperature Sensor on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to properly remove and replace the air temperature sensor on a BMW 3 Series. Open the hood, lift it, and secure it with the prop rod; d…
Guide to Replacing the Timing Chain on a BMW 3 Series 320D
Guide to Replacing the Timing Chain on a BMW 3 Series 320D
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, you will find the main instructions to disassemble and replace the timing chain on a BMW 3 Series 320D, engine code N43. First, open t…
How to Replace the Shift Knob on a BMW 3 Series
How to Replace the Shift Knob on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you can start, sit in the driver's seat of your BMW 3 Series. Begin by grasping the shift knob with both hands. At this point, pull firmly tow…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos