Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cadillac CT6 Key Fob Battery

Model: Cadillac Ct6 MK 1 - Years 2016-2023
Part: Key

In this video tutorial, learn how to replace the battery in a Cadillac CT6 key fob produced from 2016 to 2022. To begin the battery replacement, extract the physical key using the release button located at the bottom of the key fob. Next, pry open a clip at the bottom of the key fob to separate it into two halves. Once you reach this point, remove the old battery and replace it with a new one. The key fob battery model is a CR2032, 3V. After replacing the battery, close the fob, and you have completed the job.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on a Cadillac CT6?
How to Replace the Key Fob Battery on a Cadillac CT6?
Cadillac Ct6 (2016-2023 / MK 1) As shown in this tutorial, replacing the key fob battery on a Cadillac CT6 is an extremely simple and cost-effective task. To do this, you will need …
How to Replace the Remote Battery for the Cadillac CT6?
How to Replace the Remote Battery for the Cadillac CT6?
Cadillac Ct6 (2016-2023 / MK 1) To replace the remote battery for the Cadillac CT6, open the device by prying with a screwdriver in the groove between the chrome part and the sectio…
How to Replace the Key Battery on a Cadillac CT6
How to Replace the Key Battery on a Cadillac CT6
Cadillac Ct6 (2016-2023 / MK 1) Thanks to the compact and simple design of the Cadillac CT6 key, replacing the button cell battery inside is very straightforward and can be done in …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos