Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Cadillac XTS

Model: Cadillac Xts MK 1 - Years 2013-2019
Part: Key

If you need to replace the key battery on this vehicle model because it is dead, the procedure and necessary steps for replacement are outlined below. First, extract the emergency key and then pry at the joint with a screwdriver. Next, remove the cover and take out the battery located behind it. Take the new battery and place it in its compartment, ensuring the polarity is correct. Finally, reattach the cover and reinsert the emergency key.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Cadillac XTS
How to Replace the Key Battery on a Cadillac XTS
Cadillac Xts (2013-2019 / MK 1) In this new mini guide dedicated to your Cadillac XTS (model years 2013-2019), we will describe the various steps necessary to quickly and safely rep…
How to replace the battery of the Cadillac XTS key.
How to replace the battery of the Cadillac XTS key.
Cadillac Xts (2013-2019 / MK 1) For the replacement of the battery located inside the key of your Cadillac XTS, you only need a few seconds. All you have to do, in fact, is to caref…
Replacing the Headlight Bulb of the Cadillac XTS
Replacing the Headlight Bulb of the Cadillac XTS
Cadillac Xts (2013-2019 / MK 1) Today, let's see the necessary instructions on how to disassemble and replace the headlight bulb of the Cadillac XTS. First, open the hood of your ca…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos