Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Wrap the Interior of a Cadillac XTS?

Model: Cadillac Xts MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Accessory kit

Video tutorial

Wrapping the interior allows you to refresh the look of your Cadillac, making it a unique specimen in the world. Choose the film to use, purchase it, and proceed with this customization.

To wrap the interior trims, first remove them: since they are snap-fit mechanisms, a simple plastic lever will be enough to pull them out of their seats. Clean them properly and apply the pre-cut film of the right size, then remove any remaining air bubbles and finish the edges.

Finally, reinstall the various parts in their original positions.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Cadillac XTS
How to Reset the Oil Light on the Cadillac XTS
Cadillac Xts (2013-2019 / MK 1) To permanently eliminate the engine oil change warning light from your Cadillac XTS dashboard, simply follow these instructions. First, press the "St…
How to Replace the Air Filter in a Cadillac XTS
How to Replace the Air Filter in a Cadillac XTS
Cadillac Xts (2013-2019 / MK 1) In today's video, you will learn how to replace the air filter in a Cadillac XTS. Park the car on a level surface and let it cool down. First, open t…
Replacing the Headlight Bulb of the Cadillac XTS
Replacing the Headlight Bulb of the Cadillac XTS
Cadillac Xts (2013-2019 / MK 1) Today, let's see the necessary instructions on how to disassemble and replace the headlight bulb of the Cadillac XTS. First, open the hood of your ca…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos