Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Cadillac XTS

Model: Cadillac Xts MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

Video tutorial

To permanently eliminate the engine oil change warning light from your Cadillac XTS dashboard, simply follow these instructions. First, press the "Start/Stop Engine" button to turn on the ignition.

Then, locate the buttons on the right side of the steering wheel and press the down arrow multiple times until you see the "Oil life" option on the display. At this point, just press and hold the "Select" button for a few seconds.

Once the reset confirmation appears, release the button and you're done.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Cadillac XTS?
How to Replace the Cabin Air Filter on a Cadillac XTS?
Cadillac Xts (2013-2019 / MK 1) To replace the cabin air filter on a Cadillac XTS, open the glove compartment on the front passenger side to remove the bolts inside. Once the bolts …
How to Reset the Oil Change Light on a Cadillac XTS
How to Reset the Oil Change Light on a Cadillac XTS
Cadillac Xts (2013-2019 / MK 1) In this video, you can see how to reset the service light on a Cadillac XTS. Make sure the car doors are closed and turn on the ignition without star…
How to Replace the Front Brake Pads on a Cadillac XTS?
How to Replace the Front Brake Pads on a Cadillac XTS?
Cadillac Xts (2013-2019 / MK 1) To replace the front brake pads on a Cadillac XTS, lift the vehicle using a jack or lift so that the corresponding wheel is off the ground. Once elev…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos