Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Cadillac
  4. :
  5. ATS
  6. : How to change engine oil on cadillac ats

Cadillac ATS - Video tutorial

Model: Cadillac ATS MK 1 - Years 2013-2019
Part: Engine oil
Operation: How to change engine oil on cadillac ats

If we have to replace the engine oil and the filter on this car model, we will find useful information and methods of execution in the description below and in the video. First we need to raise the car and open the bonnet. Unscrew the oil filler cap and from under the car remove the stone guard panel and locate the oil draining cap which we will unscrew after placing a basin to collect the used oil on the floor. Then identify the oil filter which we are also going to unscrew with the appropriate wrench to then replace it. Then screw the bottom cap back on and go back over the compartment to proceed with filling the circuit.


Posted on 4 June 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos