Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Cadillac XTS?

Model: Cadillac Xts MK 1 - Years 2013-2019
Part: Brake pads

To replace the front brake pads on a Cadillac XTS, lift the vehicle using a jack or lift so that the corresponding wheel is off the ground. Once elevated, remove the wheel's lug nuts and take off the wheel completely. Next, remove the pins that secure the brake caliper to the brake rotor, detaching it completely and taking out the pads inside; after removing the old pads, install the new ones and reattach the caliper to the brake rotor.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Cadillac XTS?
How to Remove the Radio from a Cadillac XTS?
Cadillac Xts (2013-2019 / MK 1) To remove the radio from a Cadillac XTS, detach all covers on the center console, starting with those on the sides, then proceed to those behind the …
How to Replace the Front Headlight Bulb on the Cadillac XTS?
How to Replace the Front Headlight Bulb on the Cadillac XTS?
Cadillac Xts (2013-2019 / MK 1) To replace the front headlight bulb on the Cadillac XTS, open the hood to access the components inside the engine compartment. Specifically, you will…
How to Replace the Cabin Air Filter on a Cadillac XTS?
How to Replace the Cabin Air Filter on a Cadillac XTS?
Cadillac Xts (2013-2019 / MK 1) To replace the cabin air filter on a Cadillac XTS, open the glove compartment on the front passenger side to remove the bolts inside. Once the bolts …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos