Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Escalade
    4. : How to replace the battery on a Cadillac Escalade.

Cadillac Escalade - Video tutorial

Model: Cadillac Escalade Gmtk2xl - Years 2015-2020
Part: Battery
Operation: How to replace the battery on a Cadillac Escalade.

If we intend to replace the battery on this car model because it is depleted, in the description below we can find all the information and useful instructions for a safe replacement. After lifting the engine hood, the battery is located on the right side, and to access it, it is necessary to remove the fastening screws of the upper plate. Then proceed to disconnect the negative pole first and then the positive one. Remove the battery from the engine compartment and prepare the new one to position it in place of the old one. Then proceed to reconnect the positive pole first and then the negative one, and finally reposition and fasten the screws of the upper plate again.


Posted on 16 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos