Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Add Smartphone Display to Cadillac CUE

Model: Cadillac Cadillac Various
Part: Checks and maintenance

Video tutorial

As shown in the video, to add your smartphone display to your Cadillac CUE, you need to remove all the panels supporting it on both the right and left sides. From the passenger side, also remove the panels below the glove compartment and the glove compartment itself.

You must also remove the lower piece of the centre console. After unscrewing the two 7 mm screws, you will be able to lift the small door in the middle and remove the central panel.

Unscrew the other supporting screws. At this point, you should have previously purchased a cigarette lighter with a USB port and from the rear centre line, prepare a housing for your USB port, extending the connector wire of the USB port to the connectors behind the console.

Connect it, and once you plug your smartphone into the USB socket, it will appear on the display of your Cadillac CUE.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box Located in the Cadillac Seville?
Cadillac Cadillac Various If you do not know the exact location of the fuse box in your Cadillac Seville (1998-2004), do not worry as below you will find all the necessary ins…
How to Replace the External Wing Mirror on the Cadillac Deville
How to Replace the External Wing Mirror on the Cadillac Deville
Cadillac Cadillac Various If you need to change the external wing mirror and don't know how to do it, simply follow the instructions in this guide. First, park your Cadillac D…
How to Reset the Maintenance Light on a 2010 Cadillac SRX
How to Reset the Maintenance Light on a 2010 Cadillac SRX
Cadillac Cadillac Various If you own a 2010 Cadillac SRX and are wondering how to correctly perform the manual reset of the maintenance light, pay attention to the following i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos