Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for a 2020 Cadillac Escalade

Model: Cadillac Escalade Gmtk2xl - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Key

See other generations:
Video tutorial

The procedure to replace the battery in the key fob of a 2020 Cadillac Escalade is very simple. First, take the key fob from your car and remove the metal lever inside; to do this, press the button on the top of the fob (short side) and pull it out. Once the key is extracted, use it to pry at the edges of the fob to open it. At this point, you will have the cover open with the circuit board and battery compartment inside.

Next, remove the dead battery by prying it out with the flat tip of a screwdriver, then replace it with a new one. The required model is a flat CR2032 battery. Close the fob and reinsert the key into its designated slot.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery in a Cadillac Escalade
How to Replace the Key Fob Battery in a Cadillac Escalade
Cadillac Escalade (2007-2014 / Gmt900) In today's video, you will see how to replace the battery in the key fob of a 2007-2014 Cadillac Escalade. Start by opening the key fob case with a f…
How to Replace the Key Fob Battery in a Cadillac Escalade?
How to Replace the Key Fob Battery in a Cadillac Escalade?
Cadillac Escalade (2007-2014 / Gmt900) Replacing the key fob battery in a Cadillac Escalade, as shown in this tutorial, is an extremely simple and quick operation. First, obtain a replacem…
How to Replace the Key Fob Battery for the Cadillac Escalade
Cadillac Escalade (2021-2026 / Gmt1xx) If the key fob for your new Cadillac Escalade (2021-2023) has stopped working due to a dead battery and you want to learn how to replace it, follow t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos