Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located in the 2006 Chevrolet Silverado?

Model: Chevrolet Silverado MK 1 - Years 1998-2007
Part: Fuse box

Finding the fuses of your first generation Chevrolet Silverado (year 2006) is really very simple and you just need to follow the steps described in the following guide to complete the operation in a few seconds. First of all, remember to completely turn off your Chevrolet Silverado and then remove the plastic protective panel located at the bottom of the dashboard end. Once you have removed the cover in question, locate the fuses you were looking for and you're done. Before any possible intervention on the fuses, you must disconnect the battery for safety reasons.

Posted on 9 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Chevrolet Silverado 2 located?
Where is the fuse box of the Chevrolet Silverado 2 located?
Chevrolet Silverado (2007-2014 / MK 2) If you want to find out where the box containing all the fuses of your second edition Chevrolet Silverado is located, just read the following guide a…
Where is the fuse box of the Chevrolet Silverado 1500 located?
Where is the fuse box of the Chevrolet Silverado 1500 located?
Chevrolet Silverado (2019-2026 / MK 1) If you want to find the fuse box of the engine on your new Chevrolet Silverado 1500 by yourself, all you have to do is pay attention to the steps des…
Where is the fuse box of the Chevrolet Silverado located?
Where is the fuse box of the Chevrolet Silverado located?
Chevrolet Silverado (1998-2007 / MK 1) The 2004 Chevrolet Silverado model 1 has two fuse boxes inside. The first fuse box is installed inside the front hood, specifically near the battery.…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos