Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : Disassemble the fuel pump on Chevrolet Aveo

Chevrolet Aveo - Video tutorial

Model: Chevrolet Aveo T200, MK 1 - Years 2002-2011
Part: Fuel pump
Operation: Disassemble the fuel pump on Chevrolet Aveo

How do we go to disassemble the fuel pump on Chevrolet Aveo LT? To begin we disconnect the battery cables, then, we remove the rear seat seats of the car. With a socket wrench, unscrew the tightening screws of the metal cap (if present), remove it from its seat, cover the perimeter with absorbent paper to stop liquid leaks. Unscrew the fuel pump clamp, disconnect the power supply terminals and the liquid circulation pipes. We extract the floating fuel pump from its seat with attached pieces. Finally we reassemble a new piece.


Posted on 15 October 2023 by ScegliAuto



Where is the fuse box located in the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / T200, MK 1) The Chevrolet Aveo model 1 has two fuse boxes inside. The first fuse box is located inside the car, specifically behind the driver's side glove compa
Remove the car stereo from your Chevrolet Aveo
Chevrolet Aveo (2002-2011 / T200, MK 1) Do you want to remove the car radio of your Chevrolet Aveo and don't know how to do it? Let's see in this video how to disassemble the original stere
Where is the fuse box located in the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / T200, MK 1) In this new mini guide dedicated to your Chevrolet Aveo first generation (year 2002-2006), we will discover where the car's fuse box is located and h

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos