Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to turn off the oil change light on a Chevrolet Colorado MK2

Model: Chevrolet Colorado MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:
Video tutorial

In this video we can see how to reset the oil light of a Chevrolet Colorado MK2: first of all, getting into the vehicle, we need to make sure that the doors and the front hood are properly closed. Then we turn on the instrument panel, and using the control panel located on the right side of the steering wheel, moving with the directional arrows located on all four sides, we navigate to the menu and then to the oil change indication.

Now we hold down the central button until we see that the service is reset and the light turns off. At this point, for confirmation, we turn off the panel and turn it back on. The light is no longer on.


Posted on 19 September 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a 2020 Chevrolet Colorado
How to Reset the Oil Change Light on a 2020 Chevrolet Colorado
Chevrolet Colorado (2015-2022 / MK 2) In this article, you will learn how to reset the oil change light on a 2020 Chevrolet Colorado. The procedure is simple and takes little time to comp…
How to Reset the Oil Change Light on a Chevrolet Colorado
How to Reset the Oil Change Light on a Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) In this video tutorial, you can see how to reset the oil change light on a Chevrolet Colorado by following a few simple steps that will guide you in …
How to Reset the Oil Light on a Chevrolet Colorado
How to Reset the Oil Light on a Chevrolet Colorado
Chevrolet Colorado (2004-2012 / MK 1) Today, you will learn how to reset the oil light on a 2009 Chevrolet Silverado. To reset the oil change light, turn on the vehicle's ignition and pre…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos