Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the key fob for the Chevrolet Trax

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Key

To program the second key for the Chevrolet Trax, we need to get inside the vehicle with both keys and insert the key we want to program into the ignition switch. We turn the car on and off three times in a row and then remove the key from the ignition switch. We press the remote control buttons to continue with the key programming. We finish the procedure by getting out of the vehicle and pressing the buttons from the outside before starting the car.

Posted on 18 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery of Chevrolet Trax?
How to replace the remote control battery of Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) Replacing the remote control battery of the Chevrolet Trax, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we…
Where is the OBD2 port of the Chevrolet Trax located?
Where is the OBD2 port of the Chevrolet Trax located?
Chevrolet Trax (2013-2022 / MK 1) Thanks to the steps described in the following guide aimed at all of you who own a first-generation Chevrolet Trax, you will be able to find the OBD2…
How to replace the battery of the Chevrolet Trax key
How to replace the battery of the Chevrolet Trax key
Chevrolet Trax (2013-2022 / MK 1) To correctly replace the button battery located inside the smart key of your Chevrolet Trax, simply follow these simple steps. First, you need to get…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos