Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel of the Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Door trim panel

See other generations:
Video tutorial

It will be possible to remove the door panel of the Chevrolet Cruze by using a tool to pry off the inner trim of the handle housing. Then, you will need to loosen the screws located underneath so that the panel can be completely detached.

To do this, you will also need to disconnect the connectors that are connected to the window regulator in order to insert the new piece. The new piece can then be properly secured with screws and connected to ensure that everything works after the replacement.


Posted on 24 November 2025 by ScegliAuto


Related tutorials

Removing the Lock on a Chevrolet Cruze
Removing the Lock on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Learn how to remove the lock from the door of a Chevrolet Cruze. Remove the cover from the opening handle, then unscrew the screws with a screwdriver…
Removing the Door Panel of the Chevrolet Cruze
Removing the Door Panel of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Below is the procedure to remove and replace the front door panel of the Chevrolet Cruze. First, open the front door and start by removing the plasti…
Replacing the External Door Handle of the Chevrolet Cruze
Replacing the External Door Handle of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The instructions in this guide will allow you to disassemble and replace the external door handle of the front door of the Chevrolet Cruze. First, op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos